I got the cables managed, all nice and tidy (so proud of myself
)
I got almost all the possible fans headed (and tested) in the right direction. (Flow goes from front to back and bottom to top).
Case is closed, as needed (CoolerMaster CM 690iii) here are the way the fans are spread.
Front: 180mm - Came installed with the case - Blowing inside.
Bottom: 120mm - Self Installed - Blows inside.
Top: 2x140mm - Self Installed - Blows outside
Back: 120mm - Pre-Installed - Blows outside.
HDD Cage - There is a place to mount another 120mm but it is blocked by the GPU (its a big ass GPU)
CPU: I have a heatsink on the CPU but it has a 140mm fan blowing torwards the back (not inside the CPU itself). There is room for another fan on the other side but it is blocked by the RAM. The cooler is Scythe Ashura. - If this is too complex I could just take a picture and upload...
On my last crash I monitored the temperature using a second screen, the fan wasn't loud (GPU fan) was around 70 degrees (c) and my CPU was on ~30 (c).
After the restart, I checked the GPU temp again, it was shown to be okay, but when touching the top of the GPU, it was REALLY hot
Could it be that there is a problem with my GPU itself? Wasn't build correctly?