Spoiler:
Cheat available:
==================
//Fai's cheat pack written by initialD
//Fai's cheat pack hacked by initialD (http://wc3edit.net)
Password: <space>have fun<space>
Type password to activate cheat commands and disable
replay.
A total 50 cheat commands.
Include the dot on your cheat commands where necessary.
X is amount required of the cheat command.
X could be negative figures or zero.
If you didn't insert a number for X, it would be taken
as 0 in most of the time.
# is player(com or human) colour code(1-16).
* is human player colour code(1-12).
Funny stuff: If you type the password twice,
you will be scolded.
If you insert an invalid player code
for functions, you will be teased.
Note: Host shouldn't be activating too much
functions or buffs. Ask a teammate to activate
it instead, if someone complains about lagginess.
Host should always use "cf." and "cb.all" before
quit game to avoid memory leakings.
===================================================
Commands:
==================================================
Basic commands (13x commands)
--------------
cl. : access a brief Fai's command list
cc. : see human player colour codes list
go.X : add X gold to you (will not change gold
resource in the out-game-chart)
*go.X : add X gold to player *.(see NOTE below)
(see also feature no.6)
lb.X : add X lumber. (will not change wood
resourse in the out-game-chart)
*lb.X : add X gold to player *.(see NOTE below)
(see also feature no.6)
ri.: remove all items which are on ground
cs.# : catch sight of player#'s units.
(ie. you can see all player#'s units including
invisible units)
ls.# : lose sight of player #'s units.
*cs.# : player* catches sight of player#'s units
*ls.# : player* catches sight of player#'s units
(see NOTE below)
bt.* : instanly boot(kick) player *, yet other
players will see him as an AFKer for a few
minutes until the leaving message appears
bt.13 : The unlucky number 13!This command will kick
all players including yourself!
Don't try this at home. LoL
Functions (17x commands)
---------
tp. : patrol(hotkey P) becomes teleport
tp : close tp.
*tp.: activate tp. for player*
*tp : close tp. for player*
im. : activate infinte mana (with an illusion)
im : close im.
*im.: activate im. for player*
*im : close im. for player*
ar. : auto-refresh spells (ie.no cooldown)
ar : close ar.
*ar.: activate ar. for player*
*ar : close ar. for player*
mh. : activate maphack for you yourself only. (not your
teammate. It explores teammate minimap though)
mh : close mh.
*mh.: activate mh. for player*
*mh : close mh. for player*
cf. : close all special functions which activated by you
(use this command at the end of the game to avoid
memory leaking)
All commands for function closing will take about 1-3 second
Confirmation message will appear.
Spaces are not allowed for commands which close function.
(eg. use "3tp", not "3 tp" to close tp. for player 3)
Modifying Units (16x commands)
---------------
These commands work on the unit(s) you've selected!
X is required amount. X could be negative: -X
as.X : add X points to hero's stats.
(ie. +str +agi +int)
sp.X : add X skill points (ie:can pick more spells)
sp. : remove all skill points
st.X : set strength to X
ag.X : set agility to X
it.X : set inteligence to X
ms.X : add up X movement speed (doesn't stacked)
ms. : set unit's movement speed back to default
lv.X : set hero level to X(will not have level up
flash)
hp.X : set hit point to X
hp.. : kill selected unit(s)
mp.X : set mana point to X
ci.X : copy items X times from the
first(top left) inventory slot
(minimal 1 item)
(maximum 99 times to avoid lagginess)
di.X : drop X random items
(minimal 1 item)
(maximum 99 items to avoid lagginess)
iv. : invulnerable
vl. : vulnerable
Buffs (4x commands)
-----
Select ONE unit before you use the following command!
rg.X : add a regeneration buff, Xhp & Xmp regeneration
per second (stackable)
pu.X : power up buff.
Each X point of pu. will provide
+1 str(stacked)
+1 agi(stacked)
+1 int(stacked)
+4 movement speed(doesn't stacked)
Each 3 X points of pu. will provide
+1 hp regeneration(stacked)
+1 mp regeneration(stacked)
Note: Movement speed bonus doesn't stacked. The new bonus
will replace the old one. Removing pu. buff
will also remove the bonus movement speed
you have set with "ms." command
Note: Negative regeneration works like a poisoned
buff
Note: "pu.5" would be enough in DotA, more than that
would be obvious!
"pu.5"= +5stats,+1 hp/mp regeneration & +20ms
rb. : remove cheated buffs on the unit you've
selected.
rb.all: remove all cheated buffs added by you,including
buffs in your own units and other units as well
(this command doesn't require unit selection)
(use "rb.all" command at the end of the game to avoid
all memory leaking)
All commands for removing buffs will take less than 1 sec
Do not change your unit selection before the confirmation
message appears.
======================================================
NOTE :About player's codes
1) #or* are player colour codes. They are 1 Red, 2 Blue,
3 Teal, 4 Purple, 5 Yellow, 6 Orange, 7 Green, 8 Pink,
9 Gray, 10 Lightblue, 11 Darkgreen and 12 Brown.
Notice that there are no human player 1 and player 7
in DotA.
2)For cs. or ls.(in DotA)
Neutral creeps/roshan are under player's 13,
Secret shops/creep-moving spots/taverns are under
player's 16.
Sentinel's creeps are under player 1
Scourge's creeps are under player 6
Sentinel's buildings are under player 2(shared
with player blue)
Scourge's buildings are under player 7(shared with
player pink)
Tips: Click on the player's circlet on the hero
selection area to see enemy gold amount.
Although player 13-16 are not real player,
you can still cs.# or ls.# them.
3)Example :"bt.9" or "bt. 9" will kick player grey.
Example : "8go.500" or "8 go. 500" will give player
pink extra 500 gold.
"8go.-500" or "8 go. -500" will reduce pink's
gold by 500.
Example : "3cs.13" or "3 cs. 13: now player teal will
be able to see Roshan and neutral creeps.
4)If a player insert an invalid code for #or*, the
player colour code will pop up as a reminder.
Thus, you can use the following commands to access
the colour codes list.
bt.? ?go. ?cs. cs.? etc...
=====================================================
==================
//Fai's cheat pack written by initialD
//Fai's cheat pack hacked by initialD (http://wc3edit.net)
Password: <space>have fun<space>
Type password to activate cheat commands and disable
replay.
A total 50 cheat commands.
Include the dot on your cheat commands where necessary.
X is amount required of the cheat command.
X could be negative figures or zero.
If you didn't insert a number for X, it would be taken
as 0 in most of the time.
# is player(com or human) colour code(1-16).
* is human player colour code(1-12).
Funny stuff: If you type the password twice,
you will be scolded.
If you insert an invalid player code
for functions, you will be teased.
Note: Host shouldn't be activating too much
functions or buffs. Ask a teammate to activate
it instead, if someone complains about lagginess.
Host should always use "cf." and "cb.all" before
quit game to avoid memory leakings.
===================================================
Commands:
==================================================
Basic commands (13x commands)
--------------
cl. : access a brief Fai's command list
cc. : see human player colour codes list
go.X : add X gold to you (will not change gold
resource in the out-game-chart)
*go.X : add X gold to player *.(see NOTE below)
(see also feature no.6)
lb.X : add X lumber. (will not change wood
resourse in the out-game-chart)
*lb.X : add X gold to player *.(see NOTE below)
(see also feature no.6)
ri.: remove all items which are on ground
cs.# : catch sight of player#'s units.
(ie. you can see all player#'s units including
invisible units)
ls.# : lose sight of player #'s units.
*cs.# : player* catches sight of player#'s units
*ls.# : player* catches sight of player#'s units
(see NOTE below)
bt.* : instanly boot(kick) player *, yet other
players will see him as an AFKer for a few
minutes until the leaving message appears
bt.13 : The unlucky number 13!This command will kick
all players including yourself!
Don't try this at home. LoL
Functions (17x commands)
---------
tp. : patrol(hotkey P) becomes teleport
tp : close tp.
*tp.: activate tp. for player*
*tp : close tp. for player*
im. : activate infinte mana (with an illusion)
im : close im.
*im.: activate im. for player*
*im : close im. for player*
ar. : auto-refresh spells (ie.no cooldown)
ar : close ar.
*ar.: activate ar. for player*
*ar : close ar. for player*
mh. : activate maphack for you yourself only. (not your
teammate. It explores teammate minimap though)
mh : close mh.
*mh.: activate mh. for player*
*mh : close mh. for player*
cf. : close all special functions which activated by you
(use this command at the end of the game to avoid
memory leaking)
All commands for function closing will take about 1-3 second
Confirmation message will appear.
Spaces are not allowed for commands which close function.
(eg. use "3tp", not "3 tp" to close tp. for player 3)
Modifying Units (16x commands)
---------------
These commands work on the unit(s) you've selected!
X is required amount. X could be negative: -X
as.X : add X points to hero's stats.
(ie. +str +agi +int)
sp.X : add X skill points (ie:can pick more spells)
sp. : remove all skill points
st.X : set strength to X
ag.X : set agility to X
it.X : set inteligence to X
ms.X : add up X movement speed (doesn't stacked)
ms. : set unit's movement speed back to default
lv.X : set hero level to X(will not have level up
flash)
hp.X : set hit point to X
hp.. : kill selected unit(s)
mp.X : set mana point to X
ci.X : copy items X times from the
first(top left) inventory slot
(minimal 1 item)
(maximum 99 times to avoid lagginess)
di.X : drop X random items
(minimal 1 item)
(maximum 99 items to avoid lagginess)
iv. : invulnerable
vl. : vulnerable
Buffs (4x commands)
-----
Select ONE unit before you use the following command!
rg.X : add a regeneration buff, Xhp & Xmp regeneration
per second (stackable)
pu.X : power up buff.
Each X point of pu. will provide
+1 str(stacked)
+1 agi(stacked)
+1 int(stacked)
+4 movement speed(doesn't stacked)
Each 3 X points of pu. will provide
+1 hp regeneration(stacked)
+1 mp regeneration(stacked)
Note: Movement speed bonus doesn't stacked. The new bonus
will replace the old one. Removing pu. buff
will also remove the bonus movement speed
you have set with "ms." command
Note: Negative regeneration works like a poisoned
buff
Note: "pu.5" would be enough in DotA, more than that
would be obvious!
"pu.5"= +5stats,+1 hp/mp regeneration & +20ms
rb. : remove cheated buffs on the unit you've
selected.
rb.all: remove all cheated buffs added by you,including
buffs in your own units and other units as well
(this command doesn't require unit selection)
(use "rb.all" command at the end of the game to avoid
all memory leaking)
All commands for removing buffs will take less than 1 sec
Do not change your unit selection before the confirmation
message appears.
======================================================
NOTE :About player's codes
1) #or* are player colour codes. They are 1 Red, 2 Blue,
3 Teal, 4 Purple, 5 Yellow, 6 Orange, 7 Green, 8 Pink,
9 Gray, 10 Lightblue, 11 Darkgreen and 12 Brown.
Notice that there are no human player 1 and player 7
in DotA.
2)For cs. or ls.(in DotA)
Neutral creeps/roshan are under player's 13,
Secret shops/creep-moving spots/taverns are under
player's 16.
Sentinel's creeps are under player 1
Scourge's creeps are under player 6
Sentinel's buildings are under player 2(shared
with player blue)
Scourge's buildings are under player 7(shared with
player pink)
Tips: Click on the player's circlet on the hero
selection area to see enemy gold amount.
Although player 13-16 are not real player,
you can still cs.# or ls.# them.
3)Example :"bt.9" or "bt. 9" will kick player grey.
Example : "8go.500" or "8 go. 500" will give player
pink extra 500 gold.
"8go.-500" or "8 go. -500" will reduce pink's
gold by 500.
Example : "3cs.13" or "3 cs. 13: now player teal will
be able to see Roshan and neutral creeps.
4)If a player insert an invalid code for #or*, the
player colour code will pop up as a reminder.
Thus, you can use the following commands to access
the colour codes list.
bt.? ?go. ?cs. cs.? etc...
=====================================================
