Can someone please cheat Hell of Ruin 0.76? I need cheats like
-gold xxx
-wood xxx
-mh
-invuln
singleplay
etc
http://www.epicwar.com/maps/download/30 ... 200.76.w3x
[Request] Hell of Ruin 0.76
Moderator: Cheaters
-
- Senior Member
- Posts: 119
- Joined: February 3rd, 2007, 5:45 am
- Location: Singapore, Singapore
Re: [Request] Hell of Ruin 0.76
"-cheated by wc3edit.net" to activate cheats
(Requires no unit selection)
-mh (Does not flash screen or share vision with allies)
-mhoff (Does not flash screen and turns off mh)
-gold x (Adds x gold)
-lumber x (Adds x lumber)
-nocd (No cooldowns)
-cdon (Cooldowns)
-mana (Use of spells costs no mana)
-nomana (Use of spells cost mana)
-setname x (x = Desired name, max of 15 characters)
-setcolor x (x = Desired color*)
-locktrade (Locks resource trading)
-unlocktrade (Unlocks resource trading)
*Colors are as follows
red, blue, teal, purple, yellow, orange, green, pink, gray, lb, dg, brown
"dark green" or "light blue" won't work.
(Uses on all units currently selected - Best used with -mh)
NOTE: The selection trigger does not use "SyncSelections()" so it does NOT lock up units or cause errors! . Also, selected units do not have to be your own =3
-int x (Sets int to x) --> Can not set to less than 1!
-agi x (Sets agility to x) --> Can not set to less than 1!
-str x (Sets strength to x) --> Can not set to less than 1!
-lvl x (Sets lvl to x)
-xp x (Sets xp to x) --> Xp can not be set below the necessary xp amount to maintain a hero level
-hp x (Sets hp to to x/Maxhp)
-mp x (Sets mp to x/Maxmp)
-ms x (Move speed)
-invul (Makes unit invulnerable)
-vul (Makes unit vulnerable)
-kill (Kills selected units)
-pathoff (Disables collision a.k.a. walk through walls/cliffs ect.)
-pathon (Opposite)
-chargesx y (Replace x with the item slot number (1-6) and y with the # of charges)
-debuff (Removes all positive and negative buffs from your selected units)
Key Bindings: Allows you to bind a command to an arrow key
-clearkeys (Clears all commands registered on arrow keys)
-showkeys (Displays all commands bound to keys)
-bindup x (x=Command you want to bind; ie: -bindup -hp 300 --> Pressing Up Arrow Key will be as if you typed the command -hp 300)
-bindleft x (Same but with left arrow key)
-bindright x (Same but with right arrow key)
-binddown x (Same but with down arrow key)
Note: Multiple commands cannot be bound to a single key and the new command will overwrite the old
Note: As an anti-leak and multi-execution measure, if you bind a command to an arrow key and type the binding command anywhere in a chat string, the command bound will be erased and probably overridden with something you dont want.
Note: Key bindings can hold 4 different commands (One for each arrow...) for all players. Key bindings are multi-instanceable.
http://download.wc3edit.net/index.php?f ... 200.76.w3x
(Requires no unit selection)
-mh (Does not flash screen or share vision with allies)
-mhoff (Does not flash screen and turns off mh)
-gold x (Adds x gold)
-lumber x (Adds x lumber)
-nocd (No cooldowns)
-cdon (Cooldowns)
-mana (Use of spells costs no mana)
-nomana (Use of spells cost mana)
-setname x (x = Desired name, max of 15 characters)
-setcolor x (x = Desired color*)
-locktrade (Locks resource trading)
-unlocktrade (Unlocks resource trading)
*Colors are as follows
red, blue, teal, purple, yellow, orange, green, pink, gray, lb, dg, brown
"dark green" or "light blue" won't work.
(Uses on all units currently selected - Best used with -mh)
NOTE: The selection trigger does not use "SyncSelections()" so it does NOT lock up units or cause errors! . Also, selected units do not have to be your own =3
-int x (Sets int to x) --> Can not set to less than 1!
-agi x (Sets agility to x) --> Can not set to less than 1!
-str x (Sets strength to x) --> Can not set to less than 1!
-lvl x (Sets lvl to x)
-xp x (Sets xp to x) --> Xp can not be set below the necessary xp amount to maintain a hero level
-hp x (Sets hp to to x/Maxhp)
-mp x (Sets mp to x/Maxmp)
-ms x (Move speed)
-invul (Makes unit invulnerable)
-vul (Makes unit vulnerable)
-kill (Kills selected units)
-pathoff (Disables collision a.k.a. walk through walls/cliffs ect.)
-pathon (Opposite)
-chargesx y (Replace x with the item slot number (1-6) and y with the # of charges)
-debuff (Removes all positive and negative buffs from your selected units)
Key Bindings: Allows you to bind a command to an arrow key
-clearkeys (Clears all commands registered on arrow keys)
-showkeys (Displays all commands bound to keys)
-bindup x (x=Command you want to bind; ie: -bindup -hp 300 --> Pressing Up Arrow Key will be as if you typed the command -hp 300)
-bindleft x (Same but with left arrow key)
-bindright x (Same but with right arrow key)
-binddown x (Same but with down arrow key)
Note: Multiple commands cannot be bound to a single key and the new command will overwrite the old
Note: As an anti-leak and multi-execution measure, if you bind a command to an arrow key and type the binding command anywhere in a chat string, the command bound will be erased and probably overridden with something you dont want.
Note: Key bindings can hold 4 different commands (One for each arrow...) for all players. Key bindings are multi-instanceable.
http://download.wc3edit.net/index.php?f ... 200.76.w3x
-
- Legendary Genius
- Posts: 1311
- Joined: August 8th, 2007, 8:10 am
- Title: Legendary Genius²
- Location: St. George Utah
Re: [Request] Hell of Ruin 0.76
Make sure to optimize maps if they get over 4,096 bytes otherwise you can't host them on battle-net...
Though if the requester does not wish to host this on Battle-net then I shall move this to fullfilled.
Though if the requester does not wish to host this on Battle-net then I shall move this to fullfilled.
Computer Specs:
Motherboard: GA-990FXA-UD3
CPU: FX-8350 @ 4.0GHz
PSU: Corsair CX500
RAM: G.Skill Ripjaws X 8GB @ 1866
GPU: Radeon HD 4870 1GB
HDD: OCZ Vertex series 30GB SSD
Case: Antec 900
Monitor: Toshiba 32"
OS: Windows 7 Ultimate
Motherboard: GA-990FXA-UD3
CPU: FX-8350 @ 4.0GHz
PSU: Corsair CX500
RAM: G.Skill Ripjaws X 8GB @ 1866
GPU: Radeon HD 4870 1GB
HDD: OCZ Vertex series 30GB SSD
Case: Antec 900
Monitor: Toshiba 32"
OS: Windows 7 Ultimate
-
- Senior Member
- Posts: 119
- Joined: February 3rd, 2007, 5:45 am
- Location: Singapore, Singapore
Re: [Request] Hell of Ruin 0.76
The map itself is already 3.9mb. How can you even optimise it? It just cleans the whole file.
-
- Legendary Genius
- Posts: 1311
- Joined: August 8th, 2007, 8:10 am
- Title: Legendary Genius²
- Location: St. George Utah
Re: [Request] Hell of Ruin 0.76
Well since the map is not already optimized, but can't seem to work by using other optimizers. Also it is only 5 bytes over the limit. You could just simply change function names shorter manually, just enough so that it is <= 4,096 bytes...
Computer Specs:
Motherboard: GA-990FXA-UD3
CPU: FX-8350 @ 4.0GHz
PSU: Corsair CX500
RAM: G.Skill Ripjaws X 8GB @ 1866
GPU: Radeon HD 4870 1GB
HDD: OCZ Vertex series 30GB SSD
Case: Antec 900
Monitor: Toshiba 32"
OS: Windows 7 Ultimate
Motherboard: GA-990FXA-UD3
CPU: FX-8350 @ 4.0GHz
PSU: Corsair CX500
RAM: G.Skill Ripjaws X 8GB @ 1866
GPU: Radeon HD 4870 1GB
HDD: OCZ Vertex series 30GB SSD
Case: Antec 900
Monitor: Toshiba 32"
OS: Windows 7 Ultimate
-
- Senior Member
- Posts: 142
- Joined: June 15th, 2007, 10:55 pm
- Title: God Of Ownage
- Location: Lapeer Outskirts in MI
Re: [Request] Hell of Ruin 0.76
Hey, how u access the stat menu in unhacked v?
Deck the halls with gasoline! Falalala! lalalala@!@
Light it on fire and watch them all scream! Falalala! Lalala
Burn the school down to the ashes Falalalaa! lalalala!@!