First: I've extracted it from the Map itself. I could've made something wrong, but I've highly doubt it.
Second: If items are not dropping - not my fault. Contact the one who made the map and ask them to fix it.
Third: If you can't load Items from the hacked to the normal or from the normal to the hacked - Not my fault.
and last: Make a request for a deprotected version.
Spice says: On that third point, make sure you've actually copied the code correctly. That sometimes helps.
[JJCP+SP+DEP] TEvE 1.14d + 'Final' + Rawcodes + Codegen
Moderator: Cheaters
-
- Not an Admin, and Not Unique
- Posts: 1880
- Joined: March 1st, 2009, 12:30 pm
- Title: Der Boss :D
- Location: Germany
-
- Super Moderator
- Posts: 1943
- Joined: February 3rd, 2009, 11:28 pm
- Been thanked: 1 time
Re: [JJCP+SP+DEP] TEvE 1.14d + 'Final' + Rawcodes
Can I have an example of what are legendaries? Remember, I don't play this map. I need info about it.
-
- Member
- Posts: 83
- Joined: August 17th, 2008, 5:50 am
Re: [JJCP+SP+DEP] TEvE 1.14d + 'Final' + Rawcodes
Hi I noticed some of you asking for a deprotected map of the final version.
So what I did was extract the listfile from the UNPROTECTED TWILIGHT'S EVE 1.14D from here http://www.mediafire.com/?omyzjaajhgz (found in the 1st post) and used Ladik's MPQ Editor to merge it with my xdep listfile.
I then opened "'s eve Orpg Final.w3x" (the “normal” hacked version not the custom one) with RMPQEx clicked on the "Auto Search" button a few times, clicked on the "Add listfile" and added in the merged listfile in my xdep folder.
I then extracted the listfile into my xdep folder merging it with the existing listfile (so I clicked on the “Extract listfile” button selected listfile.txt in the xdep folder saved it and when it asked if I wanted to merge the listfile I clicked YES).
I then used xdep to deprotect the map.
To open the map you need JassNewGen.
I have included both the listfile and the deprotected map.
http://uploading.com/files/am2334ac/Twi ... ected.w3x/
http://uploading.com/files/dbea76f6/listfile.txt/
So what I did was extract the listfile from the UNPROTECTED TWILIGHT'S EVE 1.14D from here http://www.mediafire.com/?omyzjaajhgz (found in the 1st post) and used Ladik's MPQ Editor to merge it with my xdep listfile.
I then opened "'s eve Orpg Final.w3x" (the “normal” hacked version not the custom one) with RMPQEx clicked on the "Auto Search" button a few times, clicked on the "Add listfile" and added in the merged listfile in my xdep folder.
I then extracted the listfile into my xdep folder merging it with the existing listfile (so I clicked on the “Extract listfile” button selected listfile.txt in the xdep folder saved it and when it asked if I wanted to merge the listfile I clicked YES).
I then used xdep to deprotect the map.
To open the map you need JassNewGen.
I have included both the listfile and the deprotected map.
http://uploading.com/files/am2334ac/Twi ... ected.w3x/
http://uploading.com/files/dbea76f6/listfile.txt/
-
- Super Moderator
- Posts: 1943
- Joined: February 3rd, 2009, 11:28 pm
- Been thanked: 1 time
Re: [JJCP+SP+DEP] TEvE 1.14d + 'Final' + Rawcodes
Thanks IceMan.\
I'm adding this to the first post... One sec.
I'm adding this to the first post... One sec.
-
- Member
- Posts: 83
- Joined: August 17th, 2008, 5:50 am
Re: [JJCP+SP+DEP] TEvE 1.14d + 'Final' + Rawcodes
Hi owner123 I had some trouble uploading the files directly to the forums so I had to google up uploading sites. Anyway if you could upload the files directly on to the forums instead that would be great. Thanks.
IceMan
Due to the fact Jass New Gen is a bit laggy sometimes when I alt tab out from Warcraft 3 to look at the unit and item codes from the deprotected map I decided to type up the unit codes for all 16 of the 4th Job Heroes and Doppelganger (mainly for the limit break quest). I also used RMPQEx to dump the items. I included some hints for how to search for items:
Loot has 6 kinds of colours representing the rarity of items.
|cff8B8989Common|r
|Cff00ff00Uncommon|r
|cff009ACDRare|r
|cffA020F0Epic|r
|cffff0000Legendary|r
|cffFFD700Godly|r
Special Class of Items:
|cff8B4513Forged|r
E.g. If you are searching for Godly items do a text search (Ctrl + F) for “cffFFD700” (minus quotation marks).
I have also added in "Pugs The Commander" although the deprotected map says U00Q it is actually U00W since a while back the Q/W rawcodes in endglobals were mixed up. You can safely -load "Pugs The Commander" into an unhacked map without fear of being kicked unlike Doppelganger or Doomsday which will automatically kick you if you -load them in an unhacked map.
IceMan
Due to the fact Jass New Gen is a bit laggy sometimes when I alt tab out from Warcraft 3 to look at the unit and item codes from the deprotected map I decided to type up the unit codes for all 16 of the 4th Job Heroes and Doppelganger (mainly for the limit break quest). I also used RMPQEx to dump the items. I included some hints for how to search for items:
Loot has 6 kinds of colours representing the rarity of items.
|cff8B8989Common|r
|Cff00ff00Uncommon|r
|cff009ACDRare|r
|cffA020F0Epic|r
|cffff0000Legendary|r
|cffFFD700Godly|r
Special Class of Items:
|cff8B4513Forged|r
E.g. If you are searching for Godly items do a text search (Ctrl + F) for “cffFFD700” (minus quotation marks).
I have also added in "Pugs The Commander" although the deprotected map says U00Q it is actually U00W since a while back the Q/W rawcodes in endglobals were mixed up. You can safely -load "Pugs The Commander" into an unhacked map without fear of being kicked unlike Doppelganger or Doomsday which will automatically kick you if you -load them in an unhacked map.
You do not have the required permissions to view the files attached to this post.
Last edited by IceMan on February 19th, 2011, 2:41 pm, edited 4 times in total.
-
- Super Moderator
- Posts: 1943
- Joined: February 3rd, 2009, 11:28 pm
- Been thanked: 1 time
Re: [JJCP+SP+DEP] TEvE 1.14d + 'Final' + Rawcodes
Hi. It doesnt accept files over 8mb. I uploaded it to dropbox (Quick DL) and added a link to the first post.
-
- Newcomer
- Posts: 6
- Joined: January 8th, 2011, 9:08 am
Re: [JJCP+SP+DEP] TEvE 1.14d + 'Final' + Rawcodes
can i request a code gen like Fatherspaces itemgen, Execpt you dont generate item codes but hero codes
e.g you choose a class and choose the lvl etc
thanks, if this will work it would be very helpful!
e.g you choose a class and choose the lvl etc
thanks, if this will work it would be very helpful!
-
- Newcomer
- Posts: 1
- Joined: January 20th, 2011, 1:38 pm
Re: [JJCP+SP+DEP] TEvE 1.14d + 'Final' + Rawcodes
how to spawn items i dont get the item list... where is the code to put after -spawn
-
- Forum Staff
- Posts: 762
- Joined: October 27th, 2009, 12:18 pm
- Location: Australia, GMT+8
Re: [JJCP+SP+DEP] TEvE 1.14d + 'Final' + Rawcodes
the raw code is the values in the []'s above the items for example
to spawn a fate you would type -spawn I046:rat9
Spoiler:
If you have any questions drop in by chat sometime, chances are there'll be someone who can help you that's afking there, so the next best thing is to click the link on UndeadxAssassin's Sig and ask your question there.
-
- Senior Member
- Posts: 153
- Joined: February 9th, 2009, 7:24 am
- Title: Formerly 1badbrotha
- Location: California
Re: [JJCP+SP+DEP] TEvE 1.14d + 'Final' + Rawcodes
yea ive been gone a while and i havent look at this post in a long time so i have no idea if anyone has brought this up yet but Templar does not work just so you know
Spoiler: