wc3edit.net
https://forum.wc3edit.net/

[NZCP+SP+CC] YouTD 1.10c [SAVE/LOAD WORKS!]
https://forum.wc3edit.net/fulfilled-requests-f75/youtd-1-10c-t36552.html
Page 1 of 1

Author:  nuzamacuxe [ July 31st, 2019, 3:18 am ]
Post subject:  [NZCP+SP+CC] YouTD 1.10c [SAVE/LOAD WORKS!]

ACTIVATOR:
-easymode

COMMAND LIST:
CLICK HERE


Custom Commands:
-hero xp # - Sets your XP to #
-hero lvl # - Sets your LEVEL to #
-tower lvl # (0-25) - Sets your SELECTED TOWER'S LEVEL TO #

NOTE: USE REAL VALUES FOR THESE FOLLOWING COMMANDS, OTHERWISE WON'T WORK. REFERENCES ARE IN PARENTHESES.
1.0 = 100%
-tower bntr # (0. - 20.) - Sets your SELECTED TOWER'S BOUNTY RATIO TO #
-tower expr # (0. - 20.) - Sets your SELECTED TOWER'S EXP RATIO TO #
-tower idrp # (0. - 20.) - Sets your SELECTED TOWER'S ITEM DROP RATIO TO #
-tower iqlt # (0. - 20.) - Sets your SELECTED TOWER'S ITEM QUALITY RATIO TO #
-tower trgc # (0. - 20.) - Sets your SELECTED TOWER'S TRIGGER CHANCE TO #
-tower bfd # (0. - 20.) - Sets your SELECTED TOWER'S BUFF DURATION TO #
-tower dbd # (0. - 20.) - Sets your SELECTED TOWER'S DEBUFF DURATION TO #

HOW TO USE TOWER COMMANDS:


1) Select your desired tower like so:
Spoiler:
Image

2) Type the desired command (for example: -tower lvl 25):
Spoiler:
Image

    2.1) You can also downgrade tower's level:
    Spoiler:
    Image

Save/Load proof:
1) Saving using cheated version:
Spoiler:
Image

2) Loading my code in original version:
Spoiler:
Image

Author:  devoltz [ July 31st, 2019, 3:31 am ]
Post subject:  Re: [NZCP+SP+CC] YouTD 1.10c [SAVE/LOAD WORKS!]

when you have free time

Image

Author:  nuzamacuxe [ July 31st, 2019, 3:44 am ]
Post subject:  Re: [NZCP+SP+CC] YouTD 1.10c [SAVE/LOAD WORKS!]

Image

It won't last much btw. :( RIP.

Author:  vduongv9 [ August 5th, 2019, 3:53 am ]
Post subject:  Re: [NZCP+SP+CC] YouTD 1.10c [SAVE/LOAD WORKS!]

If you start playing the game, you will be stopped

warcraft version 1.27

Author:  nuzamacuxe [ August 5th, 2019, 4:28 am ]
Post subject:  Re: [NZCP+SP+CC] YouTD 1.10c [SAVE/LOAD WORKS!]

I'm not sure why that happens, this version does works just fine on 1.30+.

Author:  lmr22 [ October 23rd, 2020, 4:12 am ]
Post subject:  Re: [NZCP+SP+CC] YouTD 1.10c [SAVE/LOAD WORKS!]

how could I download this map

Author:  Mownmbasa [ September 7th, 2022, 3:44 pm ]
Post subject:  Re: [NZCP+SP+CC] YouTD 1.10c [SAVE/LOAD WORKS!]

Hello!
Sorry if this was asked anywhere else, is this map working with 1.27b version posted on youtd homepage?
If not then what is the earliest version of the game that runs this map?
I have tried playing it and i get the same issue as a post above me. It stops at a quarter of screen load and the only way i can exit that is by hard resetting my pc. I would love if this works with frozen throne version and not reforged 1.30+ for obvious reasons.
The thing i love about this cheated version is that i can set the itemdrop/qualitydrop to higher values since the original youtd 1.10b has diminishing returns and caps to a degree that no matter how much i try or lucky i get can't seem to go past 400% on both, or even reach that point for that matter.
I don't have programing knowledge so i cannot edit the map to remove this cap and make it just like rc3.2b which had no cap on item drop chance and quality.
So this fix is the closest thing i got to that point.
Sorry for the longwinded post and thank you in advance for reading!
Have a nice day!

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/