wc3edit.net
https://forum.wc3edit.net/

[JJ's cp or command for blink] Murloc Slide V2.0
https://forum.wc3edit.net/broken-fulfilled-f74/murloc-slide-v2-0-t10846.html
Page 1 of 1

Author:  yoze [ May 1st, 2009, 9:10 am ]
Post subject:  [JJ's cp or command for blink] Murloc Slide V2.0

Map name: Murloc Slide V2.0

Map description: murloc slide is an extremely hard escape map, were you slide and try to avoid murlocs.

Map link: http://epicwar.com/maps/68206/

Request: I'd like you to add either a command that gives the blink ability to the unit like -Blink and the unit will get an unlimited ranged blink ability, or add the cp as it has -tele inside it. Whatever is easiest for you really.

Hope you can help!
Thanks in advance.

Author:  zamundax [ May 1st, 2009, 9:55 am ]
Post subject:  Re: [JJ's cp or command for blink] Murloc Slide V2.0

Try it out
Spoiler:
-cheats<space><space> (activates cheats)
-gold #
-lumber #
-int #
-agi #
-str #
-lvl #
-xp #
-hp #
-mp #
-ms #
-debuff (Removes buff from selected unit)
-lock (locks the trade system)
-unlock (Unlocks it)
-charges# ### (First # slot 2nd charges)
-additem # (max is about 90)
-invul
-vul
-kill
-mana (Mana stays at 100%)
-invis (makes unit invisible)
-vis (visible)
-pathoff (walkthrough walls)
-pathon (normal)
-setcolor (red/blue/teal/purple/yellow/orange/green/pink/gray/lb/dg/brown)
-owner (red/blue/teal/purple/yellow/orange/green/pink/gray/lb/dg/brown)
-nocd (no cooldown)
-cdon (cooldown on)
-bindup/down/left/right (IE: -bindup -kill would make it so that when you hit up it kills whatever s selected)
-clearkeys (Clears bindings)
-showkeys (Shows bindings)
-mh (Dispalys map, no server splits, hopefully)
-setname
-size #
-food #
-heal
-copy #
-fast (Hit esc when training units)
-bfast (Hit esc on building structure)
-ufast (Research is instant)(To disable one of these commands add -no to it like -noufast)
-shareall
-share ##
-unshare ##
-ally ##
-unally ##
-soff (share off)
-spawn #### (List)
-ground ####
-add ####
-remove #### (removes the ability)
-g ## #### (gold)
-l ## #### (lumber)
-f ## #### (food)
-spa ## #### (Spawn unit)
-sn ## <name> (setname)
-sc ## (red/blue/teal/purple/yellow/orange/green/pink/gray/lb/dg/brown)
-dead (Sets units animation to dead)
-birth (Sets building to being built)
-attack (Sets unit to attack)
-stand (Sets unit to stand)
-hear (You can see what everyone is saying)
-nohear (back to normal)
-noreplay
-kick ## <message>
-tele (sets patrol to teleport)
-note (sets it back to normal)
-reg <kill/explode/red/blue/teal/purple/yellow/orange/green/pink/gray/lb/dg/brown> (Right-click two spots and a region will be made)
-time ## (Sets time to that hour)
-float ### ### (first #'s is height 2nd are speed)
-stop (Disable unit commands)
-resume (Enables them)
-area #### #### (First #'s are size 2nd Rawcode, then click where you want it)
-autoh ### (Autoheals by precentage)(A little buggy)
-disable (Disable -reg)
-list# (1-8 )
-cheaton ## (Turns cheats on for player specified)
-cheatoff ## (Turns cheats off for player specified)
-unit #### (Spawns specified unit at issued location)
-nounit (Disables -unit)
-act <activator> (Changes activator to whatever specifed, needs a - at the beginning)
-unitid (Shows the unit's rawcode)
-itemid (Shows the unit's item rawcode in first slot)
-destid (Shows rawcode of destructable in Reg)
-destroy (Removes selected units)
-revive (Revives dead hero and spawns at selected unit)
-addhp (Adds hp to any unit, needs to be divisable by 50)
-colors (Displays player numbers by color)
-say###### (# = hex code only 0-9 and A-F will work)(After the hex just put the text you want displayed)

Author:  yoze [ May 1st, 2009, 9:58 am ]
Post subject:  Re: [JJ's cp or command for blink] Murloc Slide V2.0

Thanks alot works perfectly! :)

Author:  Tup [ February 2nd, 2010, 4:49 pm ]
Post subject:  Re: [JJ's cp or command for blink] Murloc Slide V2.0

it doesn't work for me

Author:  kiwwi93 [ February 2nd, 2010, 6:16 pm ]
Post subject:  Re: [JJ's cp or command for blink] Murloc Slide V2.0

mate, that's because this is broken fulfilled, you want fulfulled, all these maps do not work with the current patch of wwarcraft, and unless you use 1.23, most of them will not work.

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/