wc3edit.net
https://forum.wc3edit.net/

[GUIDE] How to remove SProtect & SSProtect
http://forum.wc3edit.net/tutorials-cheatpacks-f80/how-to-remove-sprotect-ssprotect-t34886-10.html
Page 2 of 4

Author:  Dragking [ April 17th, 2018, 5:07 am ]
Post subject:  Re: [GUIDE] How to remove SProtect & SSProtect

The start of the guide says to open the map in mpq and see that its read only and then it says to open hxd and enter in some details but you dont specify which file to put into hxd

Author:  nuzamacuxe [ April 17th, 2018, 5:08 am ]
Post subject:  Re: [GUIDE] How to remove SProtect & SSProtect

It's the map, don't need to specify since it's obvious (I guess?).

Author:  BlacklightsC [ April 25th, 2018, 10:20 pm ]
Post subject:  Re: [GUIDE] How to remove SProtect & SSProtect

Thanks to rewrite my thread. This thread more better.
Ps. Is any issue in my tool?

Ps 2. 0x7037AFC3 is hashed value at "(hash table)"
and also 0xA3B383EC is hashed value at "(block table)"

Author:  nuzamacuxe [ April 25th, 2018, 10:52 pm ]
Post subject:  Re: [GUIDE] How to remove SProtect & SSProtect

Hey, long time no see. You're welcome!

Thank you very much! I've read your another guide as well (http://cheatmap.tistory.com/entry/7-Spr ... tSSProtect).

Your tool works just fine, didn't find any issue.

Author:  BlacklightsC [ April 26th, 2018, 1:40 am ]
Post subject:  Re: [GUIDE] How to remove SProtect & SSProtect

nuzamacuxe wrote:
Thank you very much! I've read your another guide as well (http://cheatmap.tistory.com/entry/7-Spr ... tSSProtect).


That is not my writing. My friend edited a little bit.

P.S. He also can unhex as well, like me.

Author:  nuzamacuxe [ April 26th, 2018, 3:24 am ]
Post subject:  Re: [GUIDE] How to remove SProtect & SSProtect

Oh... I thought it was you, my bad. Sorry.

Author:  clanhinata [ July 23rd, 2018, 5:49 pm ]
Post subject:  Re: [GUIDE] How to remove SProtect & SSProtect

I read all your guide , its very clearly but i found something make confuse

The Length of Hash nd Block is x Header Pos(200) but Its you write x10 ?

Author:  nuzamacuxe [ July 23rd, 2018, 6:21 pm ]
Post subject:  Re: [GUIDE] How to remove SProtect & SSProtect

There are many ways to calculate the lenght, just do in the way you feel comfortable.

Author:  clanhinata [ July 24th, 2018, 4:02 am ]
Post subject:  Re: [GUIDE] How to remove SProtect & SSProtect

I mean in your thread :

The HEADER POS on START-OFFSET is 200 but the HEADER POS on Length is 10 , did u

The LENGTH of Hash Table on SProtect Example is : 04 00 * 02 00 = 80000 not 400 ?

On BlacklightsC Old Thread

BlacklightsC wrote:
Open Windows Calculator to Programmer mode.
Change to Hex, DWORD.
Start-offset = Header Pos + Hash/Block Pos
Length = Hash/Block Size * 10

Pos and Size must read little-endian
ex. 92 E9 A7 01 -> 01 A7 E9 92 -> 0x01A7E992


nuzamacuxe wrote:

1) START-OFFSET & LENGTH VALUES:

NOTE: Don't forget to set your Windows calculator to DWORD.

    1.1) To find the START-OFFSET of the HASH TABLE:
    HASH POS + HEADER POS (01 A7 E9 92 + 200) = 1 A7 EB 92

    1.2) To find the LENGTH of the HASH TABLE:
    HASH SIZE * HEADER POS (4 00[400] * 10) = 4000

Here
nuzamacuxe wrote:
    1) START-OFFSET & LENGTH VALUES:

    NOTE: Don't forget to set your Windows calculator to DWORD.

      To find the START-OFFSET of the BLOCK TABLE:
      BLOCK POS + HEADER POS (0 + 200) = 200

      To find the LENGTH of the BLOCK TABLE:
      BLOCK SIZE * HEADER POS (2 94[294] * 10) = 2940


Here
nuzamacuxe wrote:

1) START-OFFSET & LENGTH VALUES:

NOTE: Don't forget to set your Windows calculator to DWORD.

    1.1) To find the START-OFFSET of the HASH TABLE:
    HASH POS + HEADER POS (FF E3 B4 14 + 1C4E00) = 214

    1.2) To find the LENGTH of the HASH TABLE:
    HASH SIZE * HEADER POS (8 00[800] * 10) = 8000


And here
nuzamacuxe wrote:

    1) START-OFFSET & LENGTH VALUES:

    NOTE: Don't forget to set your Windows calculator to DWORD.

      To find the START-OFFSET of the BLOCK TABLE:
      BLOCK POS + HEADER POS (FF E4 FC 16 + 1C4E00) = 1 4A 16

      To find the LENGTH of the BLOCK TABLE:
      BLOCK SIZE * HEADER POS (4 06[406] * 10) = 4060


Author:  nuzamacuxe [ July 24th, 2018, 5:08 am ]
Post subject:  Re: [GUIDE] How to remove SProtect & SSProtect

I see. This was a mistake, gonna fix it now. Thanks.

Page 2 of 4 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/