wc3edit.net https://forum.wc3edit.net/ |
|
How can I Use [FukKi CP] without using(show) dialog box? http://forum.wc3edit.net/deprotection-cheating-f64/how-can-i-use-without-using-show-dialog-box-t34129-10.html |
Page 2 of 2 |
Author: | KachaL [ July 23rd, 2017, 7:00 pm ] |
Post subject: | Re: How can I Use [FukKi CP] without using(show) dialog box? |
haxorico wrote: use -rates to see the current xp handicap, double that number and it should be fine, if after a level it resets, (again, use -rates) you will need to enable it again. I used 200 - 500 - 1000 - 10000 all of this numbers but it did not worked. forget about reset after a level. now the problem is that it do not got activated at all. |
Author: | haxorico [ July 23rd, 2017, 10:58 pm ] |
Post subject: | Re: How can I Use [FukKi CP] without using(show) dialog box? |
You are making helping you a very hard and annoying thing to do. As I explained, use the -rates command to see the bloody rates, not only are you inconsistent with the rate problem you give no information on the matter after I told you what to do to try and solve it. |
Author: | KachaL [ July 24th, 2017, 12:04 am ] |
Post subject: | Re: How can I Use [FukKi CP] without using(show) dialog box? |
haxorico wrote: As I explained, use the -rates command to see the bloody rates, I did it before and uploaded images for you. I typed ".ratex 500" then I Typed ".rates" it shows me "Experence : [500]" But my experience rate in game did not changed. haxorico wrote: not only are you inconsistent with the rate problem you give no information on the matter after I told you what to do to try and solve it. Ok. my mistake. I attached images now. |
Author: | haxorico [ July 24th, 2017, 2:14 am ] |
Post subject: | Re: How can I Use [FukKi CP] without using(show) dialog box? |
I checked and it worked fine. Here is the replay + map used. Command works fine. Either you are doing something wrong or the map doesn't use normal rates. Furthermore the fact you said it worked for a single level and then stopped, raises the concern i posted above. Does it work with other CPs? With Fukki does it work fine? |
Author: | KachaL [ July 24th, 2017, 5:45 am ] |
Post subject: | Re: How can I Use [FukKi CP] without using(show) dialog box? |
haxorico wrote: Either you are doing something wrong or the map doesn't use normal rates. Furthermore the fact you said it worked for a single level and then stopped, raises the concern i posted above. Rarely it works for single level, I couldn't find it out why it work. But Usually it does not work at all. haxorico wrote: Does it work with other CPs? Yes. it works With Fukki cp. It does not worked with sg_guy Cp, Fai CP. haxorico wrote: With Fukki does it work fine? Yes. It works fine with fukki cp. |
Page 2 of 2 | All times are UTC |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |